Working principle of plate heat exchanger

Heating or cooling by transferring heat between one medium and another

But a medium. In a detachable plate heat exchanger with gaskets, the plates are loaded with springs

A gasket that seals the channel and guides the medium into the backup channel.

The plate group is assembled between the frame plate and the pressure plate and installed by tightening

The bolts between these plates are compressed. The channel plate and pressure plate are mounted on the upper bearing rod

Hang it down and fix it in place through the lower guide rod, which is fixed to the pillar

On. This design is easy to maintain and easy to adjust heat exchange (by reducing or adding boards)

Pieces).

Introduction to the Process of Plate Heat Exchanger

The heat transfer area of a gasket plate heat exchanger consists of a series of corrugated plates, which

The corrugated plate is assembled between the frame and the pressure plate to maintain pressure. The gasket acts as a plate

Sealing between. The fluid on both sides usually flows in reverse through a heat exchanger. This provides the most

Effective heat transfer performance to achieve very close temperature difference heat transfer, i.e. outlet process medium

The temperature difference between the quality and the inlet service medium. For heat sensitive or viscous media

The flow method can be used to make the coldest fluid encounter the hottest flow when entering the heat exchanger

Body.

This can minimize the risk of overheating or freezing of the medium. We can provide various pressing depths, herringbone corrugations, and various other corrugation designs, all of which have been carefully designed and selected to achieve optimal performance. According to the application, each product series has its own specific ripple design. The optimized diversion zone ensures uniform distribution of fluid on the entire heat transfer surface and helps to avoid stagnant areas that may cause scaling.